Making connections, Usb connections, Verifying for a usb port – Kodak i55 User Manual
Page 16
12
A-61527 May 2006
Making connections
The Kodak i55/i65 Scanners can accommodate either a USB or SCSI
connection. Depending upon whether you are connecting USB or SCSI,
go to the one of the following sections.
USB connections
Verifying for a USB port
After you install the Kodak Driver Software, check for the presence and
version of a USB port.
• Select USB Test.
The USB verification tool will check your operating system and
hardware capability to determine if you need to install a USB card.
• If a functioning USB 2.0 port is present, the following window will be
displayed. Click OK and proceed with the next section.
• If your PC does not have a USB 2.0 port installed, you should install a
USB 2.0 Accessory card..:
• If you get any message other than either of the messages above, see
the section entitled, “USB connection issues” in Chapter 6,
Troubleshooting.