Installing the kodak driver software – Kodak i55 User Manual
Page 13
A-61527 May 2006
9
Installing the Kodak
Driver Software
Install the Kodak Driver Software before connecting the scanner to
your PC. The Kodak Driver Software consists of the Kodak Scanner
Drivers using the TWAIN Datasource and ISIS Driver to be used with
either USB and SCSI II connections.
1. Insert the Kodak i55/i65 Scanner Installation CD in the CD-ROM
drive. The installation program starts automatically.
NOTE: If the CD does not start automatically, open the My
Computer icon on your desktop. Double-click the icon for
your CD-ROM drive, then double-click on
Setup.exe.
2. Select Install Scanner Software.
The Kodak i55/i65 Scanner Installation window may be displayed:
NOTE: This window may or may not be displayed depending upon what
was previously installed on your computer.