Kodak i55 - Manual (Page 22)

18 A-61527 May 2006
Scanner components
Front view
Indicator lights — these indicator lights indicate the conditions of the
scanner. See the section entitled “Indicator lights” later in this section.
Side guides — slide the guides in or out to accommodate the
document size you want to scan. The balance wire must be lifted up
before you can adjust the side guides.
Input tray — place documents face-down in the input tray for scanning.
The input tray holds up to 50 documents.
Input tray extension — pull out to accommodate documents longer
than 36 cm (14 in.).
Balance wire — place the documents to be scanned in the input tray
and lower the balance wire to keep the documents in place and aid in
document feeding.
Flatbed cover — lift this cover to access the flatbed. The flatbed cover
can be easily lifted up to provide more clearance for scanning thick
books on the flatbed.
ADF cover — the ADF (automatic document feeder) lifts up to provide
access for maintenance and jam clearance.
Output tray — collects the scanned documents.
Output tray extension — pull out this extension when scanning
documents longer than A4 (8.5 x 11 inches).
Input tray extension
Balance wire
Side guides
ADF cover
Flatbed cover
Output tray
Output tray extension
Input tray
Indicator lights