Kodak i55 - Manual (Page 47)

A-61527 May 2006 43
The Paper tab The Paper tab allows you to define values relating to image output (i.e.,
cropping values, rotation, paper size and units of measure).
Camera selection box  lists the available sides of an image that you
can define individual image processing values.
The display window on the right will display the cropping area you are
altering. The cropping area will change as values are being altered.
Cropping values Cropping allows you to capture a portion of the document being
scanned. Cropping options can be used independently with color/
grayscale and bi-tonal images and are also front and rear side
independent, however for simultaneous output scanning color/
grayscale and bi-tonal cropping must be the same per side.
• On an i55 Scanner one cropping option can be assigned per
document.
• On an i65 Scanner two cropping options can be set per document.
Cropping  select one of the following options:
• Automatic: dynamically adjusts the cropping window for different
document sizes based upon the edges of the image. Use this option
for batches of mixed-sized documents.
• Aggressive: selecting this option will eliminate any residual white/
gray border on any image edges. When using Aggressive cropping,
there is a possibility that a small amount of image data from the edge
of the document may be lost.