Kodak i55 - Manual (Page 6)

2 A-61527 May 2006
Scanner features
• Easy to use
• Small, compact size
• Scans up to 21.6 x 86 cm (8.5 x 34 in.) using the automatic document
feeder when the host PC is configured with adequate memory. See
the section entitled, “System requirements” for more information.
• Scans up to 8.5 x 11.69 inches / A3 using the flatbed
• Scans 32 ppm (200 dpi, bi-tonal, duplex, portrait orientation) letter-
size documents
• Choose color, bi-tonal, grayscale, simultaneous bi-tonal and
grayscale, or simultaneous bi-tonal and color
• Easy cleaning and maintenance
• Output resolutions from 75 to 600 dpi
• Bundled ISIS and TWAIN drivers
• Length checking based on multi-feed detection
• Choice of USB 2.0 or SCSI II interface
Safety information
MSDS Material Safety Data Sheets (MSDS) for chemical products are
available on the Kodak website at: www.kodak.com/go/msds. When
accessing the MSDSs from the website, you will be required to provide
the catalog number of the consumable you want the Material Safety
Data Sheet for. See the section entitled, “Supplies and consumables”
later in this guide for a listing of supplies and catalog numbers.
Safety precautions • Use only the power supply that was provided with the scanner (Sino-
American model SA60-24).
IMPORTANT: Do not substitute another power supply model or another
manufacturer’s power supply.
• Be sure to use the proper AC power source.
• Avoid danger of electric shock. Only use the scanner and power
supply indoors in a dry location.
• Do not install the scanner in a humid or dusty area.