Kodak i55 - Manual (Page 79)

A-61527 May 2006 75
Replacing the flatbed
cover If the flatbed cover needs to be reinstalled or replaced, use the
following procedure.
1. Remove the flatbed cover from the scanner by lifting the flatbed
cover straight up.
2. Install the new flatbed cover by aligning the pins into the holes on
the scanner base and setting the flatbed cover into place.
Locking the scanner
The TWAIN Datasource provides a Lock camera option which moves
the camera into position before physically locking the scanner with the
shipping switch. ISIS does not provide this option. For TWAIN
datasource users follow the procedure below.
1. Turn on the host PC and start the Scan Validation Tool.
NOTE: For detailed instructions on starting the Scan Validation Tool,
see the section entitled “Starting the Scan Validation Tool” in
Chapter 4, Image Processing.