Konica Minolta BIZHUP C351 - Manual (Page 111)

Setting Up the PCL Driver 5
C351 5-10
Setting the File Margin
File margins are added to the document before it is printed.
1
Click the Setup tab.
2
Select the “File Margin” check box.
3
To set the width of the file margin, click the [Details] button, and then
specify the desired settings in the File Margin Details dialog box that
appears.
Front Side/Back Side: Sets the file margin values. By clearing the “Save
Value for Front and Back Sides” check box, you can specify separate
values for the front and back sides.
Shift Mode: Selects the printing process for the document.