Konica Minolta BIZHUP C351 - Manual (Page 162)

Setting Up the PostScript Driver (Windows) 6
C351 6-17
Hole Punching
Holes can be punched into the printed document.
The hole punch function is available only when optional finisher FS-507 or
FS-603 is installed. When using optional finisher FS-603, the punch kit must
be installed.
1
Click the Layout tab.
2
From the “Hole-Punch” drop-down list, select the number of punched
holes.
2
Note
Depending on the selected Binding Position setting, different hole-
punching positions are available.