Konica Minolta BIZHUP C351 - Manual (Page 276)

Various Settings 10
C351 10-63
2
Note
To apply any changes to settings for the Network tab, restart this ma-
chine (turn the main power off, then on again).
When turning the main power switch OFF then ON, wait for 10 seconds
or longer before turning it ON again; otherwise the copier may not func-
tion normally.
Subnet Mask Specify the subnet mask connecting to a network (format:
“***.***.***.***”, input range for ***: 0—255).
Default Gateway Specify the default gateway address connecting to a network
(format: “***.***.***.***”, input range for ***: 0—255).
RAW Port Number 1 Specify the RAW port number (input range: 1—65535).
RAW Port Number 2
RAW Port Number 3
RAW Port Number 4
RAW Port Number 5
RAW Port Number 6
Host Name Specify the host name (up to 63 characters).
Domain Name Specify the domain name (up to 255 characters).
DNS Server Register a maximum of three DNS servers (format: “***.***.***.***”,
input range for ***: 0—255).
SLP Specify whether to enable SLP.
LPD Specify whether to enable LPD.
Item Description