Konica Minolta BIZHUP C351 User Manual
Page 71
Setting Up Network Printing
3
C351
3-18
6
In Administrator mode of PageScope Web Connection, select “Net-
Ware” from the Network tab, and then specify the following settings.
NetWare Print: Select “Enable”.
Frame Type: Select “Auto”. (Select the frame type according to the net-
work environment.)
Mode: Select “Pserver”.
Print Server Name: Specify the print server name created in step 4.
Print Server Password: Specify only when setting from the NetWare
server.
Print Queue Scan Rate: Specify “1”. (Change as necessary.)
Bindery/NDS: Select “Bindery/NDS”.
Preferred File Server: Specify the name of the file server that connects
to the Pserver.
7
Restart this machine (turn the main power off, then on again).
–
When turning the main power switch OFF then ON, wait for 10 sec-
onds or longer before turning it ON again; otherwise the copier may
not function normally.
8
Use the NetWare server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection col-
umn, check that the created Pserver is connected.