Kenwood TK-2200L - Manual (Page 31)

23
c
hAnnel
o
perAting
F
reQuencieS
To change the operating frequency of a channel:
2
3
1
4
1
1
With the transceiver power OFF, press
and hold the PTT switch and Side 1 key
while turning the transceiver power ON.
Continue to hold the PTT switch and Side
1 key until the LED lights orange and the
transceiver announces Self .
Release the PTT switch and Side 1 key.
The transceiver announces Channel .
Pressing the Side 1 key or Side 2 key will toggle between QT,
DQT, and Channel setup.
Press the Side 1 key to increment the
Table number or the Side 2 key to
decrement the number, to select the
new channel frequency.
Press and hold the Side 1 or Side 2 key
to increment/ decrement the number by
5 at a time.
Table numbers and their corresponding
operating frequencies are provided in the
table on page 24.
A voice announcement will inform you of
the currently selected Table number.
Press and release the PTT switch, then
rotate the Channel selector to your
desired channel.
Upon pressing and releasing the PTT
switch, the transceiver announces
“Table zero”.