Kenwood TK-2200L - Manual (Page 38)

30
c
hAnnel
c
onFirmAtion
m
ode
To confirm your channel settings:
3
1
2
1
1
With the transceiver power OFF, press
and hold the PTT switch while turning
the transceiver power ON.
Continue to hold the PTT switch until the
LED lights orange and the transceiver
announces “Channel Confirm”.
Rotate the Channel selector to your
desired channel within 5 seconds,
otherwise the operation will cancel.
The transceiver announces the channel
Table number and Tone number of the
selected channel.
Release the PTT switch.
The transceiver announces the channel Table number and
Tone number of the current channel.
Note: The transceiver will automatically return to normal operation if
no action is performed for 5 seconds.