Kenwood TK-2200L - Manual (Page 34)

26
Q
uiet
t
Alk
(Qt)/ d
igitAl
Q
uiet
t
Alk
(dQt) S
ettingS
To change the QT/DQT settings of a channel:
2
4
1
3
1
1
With the transceiver power OFF, press
and hold the PTT switch and Side 1 key
while turning the transceiver power ON.
Continue to hold the PTT switch and
Side 1 key until the LED lights orange
and the transceiver announces “Self”.
Press the Side 1 key or Side 2 key to
select QT or DQT setup.
The transceiver announces “QT” or
“DQT”, depending on your selection.
Press and release the PTT switch, then
rotate the Channel selector to your
desired channel.
Upon releasing the PTT switch, the
transceiver announces “QT One” or
“DQT One”, depending on your selection.
Release the PTT switch and Side 1 key.
The transceiver announces Channel.
Pressing the Side 1 key or Side 2 key will toggle between QT,
DQT, and Channel setup.