KTI Networks Modular Media Converter Center System KC-1300 - Manual (Page 27)

-27-
3.4 Setup for In-band Management
To perform an in-band management, it is necessary to connect the sys-
tem to your TCP/IP network. The steps are:
1. Configure IP and SNMP related settings to the system using direct
console management when you receive it first time for the installa-
tion.
2. Find a proper straight-through Category 5 UTP cable (maximal length
100 meters) for the connection.
3. Connect one end of the UTP cable to the UTP port on SNMP module
and connect the other end to the device, such as a switching hub, in
your TCP/IP network.
4. Start your in-band management operations. For different manage-
ment methods, refer to:
•
Chapter 4 for Telnet management
• Chapter 5 for SNMP management
• Chapter 6 for Web management