KTI Networks Modular Media Converter Center System KC-1300 - Manual (Page 42)

-42-
5.1 Configuring SNMP Settings via Console Operation
Before performing SNMP operation, proper SNMP settings must be con-
figured in the system unit. The SNMP related settings are:
Name : Logic name to identify a specific system unit
Location : Location where the system is installed
Contact : Contact person regarding the system
Community : SNMP communities to which the system belongs
and access right to the system ( read only or read/write)
Trap hosts : IP addresses of trap hosts to which a trap is issued
and the trap community to which the system belongs.
Up to four SNMP communities and up to three trap hosts are supported
by the system SNMP agent.
These settings can be configured through console or telnet operation.
Refer to Chapter 4 for more information.