KTI Networks Modular Media Converter Center System KC-1300 - Manual (Page 29)

-29-
* Remote MC TP link status monitoring is available only when KC-
300DM in the rack is connected to a remote KC-300DM through fiber
link.
Cold Start
When the power to the system is turned on, the system start initialization
and self-test process. The self-test messages are displayed as follows if
a console connection is established successfully.:
Power-on Self-test
---------------------------------------------
$$$ System LOADER Checksum O.K !!!
$$$ System IMAGE Checksum O.K !!!
$$$ System DATA Checksum O.K !!!
$$ Waiting Copy Rom to Sdram
$$$ System Power On Self Test....
$$$ ARM Reg R/W Test Success !!!
$$$ System EEPROM Checksum O.K !!
$$$ Get parameter O.K !!
My Mac Address is xxxxxxxxxxxx
---------------------------------------------
This chapter describes the detailed console operation. It can be applied
to either out-of-band console management or in-band Telnet manage-
ment. Both are same in operation starting from login prompt.