KTI Networks Modular Media Converter Center System KC-1300 - Manual (Page 60)

-60-
6.5.5 Update Firmware
[Update Firmware] allows you to perform firmware (system software)
upgrade via TFTP protocol. Before doing TFTP operation, one TFTP
server is required and installed in the network to where this system con-
nects and new firmware file
image.bin must be placed in the TFTP server.
Set IP address for the TFTP server from where the firmware image is to be
downloaded. Specify the file name as Image.bin.
Click [Apply] to start the file transfer operation.