Konica Minolta Polygon Editing Tool - Manual (Page 12)

3) Installing the ASPI driver software to the computer
The software uses SCSI as the interface connecting the VIVID and the computer.
For the computer to recognize VIVID correctly, it is necessary to install the ASPI driver software on the
computer.
* Even if the VIVID will not be connected to the computer, it is still necessary to install the ASPI driver.
Note
When Windows Vista or Windows 7 is used, it is necessary to install the driver software of the RATOC Systems Inc.’s USB2.0-Ul-
traSCSI converter U2SCX on the computer. Be careful not to install the Adaptec ASPI driver software, because it cannot control the
VIVID digitizer.
To install the USB2.0-UltraSCSI converter driver software, refer to “About installation of U2SCX” below.
Operating Procedure
1 Start up Windows, and set the Polygon
Editing Tool CD-ROM into the computer’s
CD-ROM drive.
2 Using Explorer, access the CD-92ROM
drive and double-click on “aspi_v***.
exe”.
Memo
The “aspi_v .exe” file stores the driver and installa-
tion software in self-compressed form. Double-clicking
on“aspi_v .exe” causes the file to automatically decom-
press into multiple files.
3 Proceed to install the driver as de-
scribed below.
Memo
About the details of installation, refer to the decom-
pressed “Readme.txt” file.
4 Double-click on the decompressed
“ASPIINST.EXE” file.
The driver install program starts up.
Memo
If you use Windows XP, select [Run] from the [Start]
menu, and then run the decompressed “INSTALL.BAT”
file added “XP32” parameter as following dialog. The
install program starts to install.
5 Follow the instructions on the screen to
complete the installation.
The install program installs the ASPI driver.
Chapter
1
Preparations
n About installation of U2SCX
It is necessary to install Polygon Editing Tool on the computer before installing the driver software of the
USB2.0-UltraSCSI converter.
Operating Procedure
1 Start Windows and insert the software CD-ROM into the CD-ROM drive.
2 From Explorer, open the “U2SCX for Vista” (when using Windows Vista) or “U2SCX for
Win7” (when using Windows 7 ) directory in the CD-ROM.
3 Proceed to install the driver as described on “Installation of Emulation Driver” in U2SCX_
InstallGuide.
10