Konica Minolta Polygon Editing Tool - Manual (Page 127)

125
Chapter
2
File
Menu
300
File – Import – Digitizer – Step Scan (When VIVID 300 is Selected)
Parameters for [File-Import-Digitizer-Step Scan] Dialog Box
Turntable Used to set the serial port and rotating stage type to be used for remote operation.
Note
If connecting to a SKIDS-60YAW unit, select “CSG-602R(Ver.1.0)” from the pull-down menu.
If connecting to a SKIDS-60YAW (Ver. 2.0) unit, select “CSG-602R(Ver.2.0)”.
Rotation step Used to select the desired angle (degree) of the rotating stage from “90”, “60” and “Other”. If
“Other” is selected, enter the desired rotation step..
Current Angle Used to select the desired scan step (i.e. the angle at which scan is to be performed). “0” will be
selected first when the dialog box is opened. It is possible to select the desired angle by clicking
the angle currently displayed in [Current Angle] and selecting the desired angle from the pull-
down menu that appears. If an angle at which scan has already been performed is selected again
and the [Scan] button is clicked, the previously acquired image data will be overwritten.
Scan Causes the VIVID 300 (VI-300) to acquire a shot.
Option If this checkbox is checked, the lower section of the [Remote-Step Scan] dialog box will be active,
allowing you to set various parameters including [Distance], [Laser Intensity] and [Auto read].
Manual If this checkbox is checked, the [Distance] and [Laser Intensity] parameters can be set.
Distance Used to set the VIVID’s scan reference position.
Laser Intensity Used to set the laser beam intensity of the VIVID.
Auto read If this checkbox is checked, a color image will be read automatically when the dialog box is
opened. Even if the [Read] button is not clicked after the [Scan] button is clicked, the data will be
read automatically after images are acquired, and the color image and range image will be dis-
played in the dialog box. If there is no check mark in the [Option] checkbox, for instance when the
software is just started up, the [Auto read] checkbox will be checked automatically.
Read Clicking this button while there is no check mark in the [Auto read] checkbox will read data from
the instrument and display the range image and the latest color image that were acquired when
the [Scan] button was clicked last time in the dialog box. This button is effective only if the [Auto
read] checkbox is unchecked.
Focus Lock Sets the focus lock. The [Manual] checkbox will be checked automatically, and the current posi-
tion and Laser Intensity will be displayed.
Convert Causes the [File-Import-Digitizer-Step Scan-Convert] dialog box to appear, allowing import of the
camera data to this software.
Parameters for [File-Import-Digitizer-Step Scan-Convert] Dialog Box
Reduction Rate Selects the reduction rate to be applied when importing the data. You can select any of
the following: “1/1”, “1/4”, “1/9”, “1/16”, or “No polygon”.
Fill Holes Selects whether the programs fill in holes when importing the data. If the setting is “On”,
the program will automatically generate points to fill in holes left by missing data.
Remove Selects which the data the program excludes when carrying out the import. Select from
an of the following: “None”, “Boundary (B.)”, “5deg. & B.”, “10deg. & B.”, “15deg. &B.”, or
“20deg. & B.”
None:
Removal is not carried out when importing the data.
Boundary(B.): The program removes boundary points.
5deg. & B.,10deg. & B., 15deg. & B., 20deg. & B.:
The program removes boundary points, and also removes polygons within the
specified angular range (5°, 10 °, 15°, or 20 °) to the view vector.
Filter None: Removal is not carried out when exporting the data.
Noise Filter (N.F.): When importing the data, the points that appear to be noise will be corrected
according to other data.
Save camera data Save the images as camera data.