Konica Minolta Polygon Editing Tool - Manual (Page 96)

94
Chapter
2
File
Menu
900
910
File – Import – Digitizer – Step Scan (When VIVID 900/910 is Selected)
Parameters for [File-Import-Digitizer-Step Scan]Dialog Box
AF Executes auto-focus.
Mono Displays a monochrome monitoring image.
Color Takes and displays a color picture.
General Tab
Distance Checking this checkbox sets [Distance] on.
Intensity Checking this checkbox sets [LD] and [Gain] on.
LD Sets the intensity of the laser beam.
Gain Sets the gain.
Focus Lock Locks the focus. When you select this item, the program automatically places checks in the [Dis-
tance] and [Intensity] checkboxes, and displays the currently set position, the current laser-beam
intensity, and the gain value.
Scan (Auto Scan) Causes the VIVID unit to execute a scan.
If [Auto Scan] (in the [Hardware] tab) is checked, this name for this control becomes [Auto Scan].
Color Read When you press this button after taking a scan, the program takes a color shot and updates the
picture on the display. This button is effective only after scanning, and only if [Use Texture] is
checked and [Auto Read] is unchecked.
Convert Use when you want the program to load camera data. Opens the [File-Import-Digitizer-Step
Scan-Convert] dialog box.
Export Export scanned data in various data formats.
Go Sequentially executes those of the following functions that are checked: [AF], [Scan], [Convert],
[Export], and [Close].
Camera 1 Tab
Log If this checkbox is checked, the program applies log correction for color data. Use when you
want to brighten up neutral color.
Smooth If this checkbox is checked, the program applies smoothing to color data. Use if illumination is
low and the image is unclear.
Dark If this checkbox is checked, the program applies dark correction to color data. Use if you are get-
ting striation-type noise in the images.
Color Level Checking this checkbox sets the program to use color exposure level.
Threshold Checking this checkbox sets the program to use a threshold for distance-image creation.
Fine/Fast Selects the scan mode.
Dynamic Range Expan-
sion
Mode
If this checkbox is checked, the program takes multiple shots so as to expand the dynamic range
and reduce data loss. This checkbox is displayed only for the VIVID 910.
High Quality Mode If this box is checked, the program includes display of low-reliability data. On the range image,
data for which laser intensity was too high appear in light gray, while data for which intensity
was too low are shown in dark gray. This checkbox appears only if you using the VIVID 910.
Use Texture Checking this checkbox enables use of color images when converting and exporting.
M
emo
Note that if you use the [Go] button, the program will automatically load color data after scan-
ning, regardless of whether [Auto Read] is checked.
Auto read Checking this checkbox enables auto-read operation. If auto-read is enabled, the program will
load data after scanning (after the [Scan] button is clicked), with no need to click the [Color
Read] button.
Auto Load Parameters Causes the command to automatically load the parameter settings saved by the [Save Parameters]
feature.
Save Parameters Saves the parameter settings entered in the [Camera 1] tab.
Load Parameters Loads the parameter settings saved by the Save [Parameters] feature.