Konica Minolta Polygon Editing Tool - Manual (Page 253)

251
Chapter
2
Pop-up Menus
in Element List
9i
910
900
700
300
View Image
Displaying Color Images
This command is used to display color images of the element(s) currently selected in the element list.
Operating Procedure
1 Click the desired element(s) whose
color images are to be shown with the
right mouse button, and select [View
Image] from the pop-up menu that ap-
pears.
The color images of the selected element(s)
will be displayed.
Set Wireframe Color
Changing Wireframe Color
This command is used to set the wireframe color for the element(s) selected in the element list.
Note
If a pop-up menu is displayed without elements selected in the element list, [Set Wireframe Color] will not be displayed
in the menu.
Operating Procedure
1 Click the element(s) for which you want
to set wireframe color with the right
mouse button, and select [Set Wire-
frame Color] from the pop-up menu
that appears.
A color palette dialog box will appear.
M
emo
If two or more elements have been selected by clicking
them while holding down the [Shift] or [Ctrl] key, the
color images for those elements can be displayed.
M
emo
If two or more elements have been selected by clicking
them while holding down the [Shift] or [Ctrl] key, the
wireframe color for those elements can be set.
2 Select the desired color from the color
palette.
3 Click the [OK] button.
The wireframe color(s) for the selected element(s) will be
changed to the one selected at step 2.