KiSS Networked Entertainment DP-450 - Manual (Page 17)

16 17
5.1 Advanced setup
You can always access the Setup menu and adjust the DP-450 to your specific requirements and hardware. When DP-450
appears on the main screen, press the SETUP button on your remote control, and a menu will appear with the available
options. The orange frame shows your position on the menu. Use the arrow buttons to move the frame and select by pressing
the ENTER button. The settings on some of the menus have already been determined under Quick setup, but there are several
settings available under Advanced setup as well.
First screen: Language Settings
The first menu is the Language settings menu. Here you select the language you
wish to use for the menus, that will appear on the screen, and your preferred
language when playing a DVD film – for subtitles, speech and menus (they will
only be used if the film supports the language).
Second screen: Video settings
You have already selected your TV set on another menu, but as previously
mentioned you can change it on this menu as well. You can also select a different
TV system than PAL (the European standard), and you can indicate whether you
have RGB via SCART, Component via SCART or S-Video. Refer to your TV set’s
instruction manual before selecting the connection.
Note: Composite Video via SCART is always activated.
Third screen: Audio settings
This menu enables you to select either RAW or PCM.
PCM: Stereo sound. Used for slightly older amplifiers.
RAW: Plays the sound track on the disk. Recommended as default.
Fourth screen: Miscellaneous settings
This display lets you set your preferred level of protection on the films. Most
films are divided into levels, so that parents can prevent their children from
seeing a specific type of film. In the next menu item, you create a password that
is required for editing this setup*. The light in the DVD Player’s display can be
modified from dim to normal or bright. All settings can be reset in the “Restore
settings” menu, and the Quick setup can be re-initiated from the last menu.
*If you wish to modify this setup later on, you must re-enter the password.
Note: To leave a menu, press the left arrow on the remote control.
5