Kenwood TH78E - Manual (Page 38)

The chart shows how members of a group might
communicate with each other. You may wish to
refer back to this chart as you read the examples on
the following gages.
Your station ID code is preset in memory A. You
Group Communication Network Example
Predetermined frequency 145.020MHz
Your Individual code
Member 1
Member 2
Member 3
Group code
111
Individual code 222
Individual code 333
Individual code 444
789
Your memory
A 111
0
1 222
2 333
3 444
4
5 789
4 Sending Pages (Calling)
1 Turn to the predetermined frequency.
2 Press the F key then press the 1 key to enter the
Paging mode. The Paging function of the other
transceiver must also be on.
3 Press and hold the F key for longer than one
second, then press the 1 key to enter the code
setting mode.
4 Use the tuning control to select the memory channel
where the local station code is stored
Calling All Group Members
Select the group code memory channel to call all
members of a group. In the example below, the
group code is stored in channel 5.