2: play audio cd, 2a: audio cd play, 2b: cd-r/rw drive audio input – KORG Electronic Keyboard User Manual

Page 710: 1–2: play audio cd, 1–2a: audio cd play, 1–2b: cd-r/rw drive audio input

Advertising
background image

Disk mode

700

1–2: Play Audio CD

Here you can use the internal CD-R/RW drive or a
USB-connected CD-R/RW drive to play an audio CD.

It is convenient to use this method to verify a CD that
you created in the Make Audio CD page.

It is not possible to play back an audio CD that has
not been finalized.

You can use the SEQUENCER switches to play or stop
the internal CD-R/RW drive or a USB-connected CD-
R/RW drive. The digital audio signal from the audio
CD will be input.

To play back an audio CD, use “Drive Select” to select
the drive, and use CD-R/RW Drive Audio Input to set
the “Level,” “Bus (IFX/Indiv),” Pan, and “Level.” and
Bus Select (IFX/Indiv.) for the LEFT (L channel) and
RIGHT (R channel).

The audio CD can be controlled by the SEQUENCER
switches.

If you play the keyboard or controllers while the
internal CD-R/RW drive is playing, the impact may
cause skips or read errors to occur in the playback.

1–2a: Audio CD Play

Location

[(00:00.0…)]

Displays the current location of the audio CD track
that is playing. When stopped, this specifies the
location at which playback will begin.
When Track or Index are re-selected, this will be
00:00.0.

Drive Select

Specifies the drive of the audio CD that will be played.
Only CD-ROM/R/RW drives can be selected.

Track

[01…]

Selects the audio CD track that will be played.

Index

[01…]

Specifies the index of the audio CD that will be played.
This is valid only if you have selected a track that has
index data.
In the case of some CD-R/RW drives, index
information cannot be obtained.

Volume

[000…127]

Specifies the volume of the audio output from the CD-
R/RW drive.
Since some CD-R/RW drives do not support this, the
volume may not change when you adjust this setting.

1–2b: CD-R/RW Drive Audio Input

This specifies the output destination for the signal from
an audio CD played back on the internal CD-R/RW
drive or a USB-connected CD-R/RW drive. Make
settings for the L and R channels.

1–2a

1–2b

1–2PMC

SEQUENCER

START/STOP switch

Play/Stop

FF>> switch

Fast-forward

<<REW switch

Rewind

PAUSE switch

Pause

LOCATE switch

Return to the beginning of the track

Advertising