KORG Electronic Keyboard - Manual (Page 764)

Effect Guide
754
Mixer
Master Volume
This sets the level of the final output after passing
through the total effects.
Note: You can use the control surface to control the
master volume. Master volume can also be controlled
from the P0– Control Surface page.
Using MIDI to control the Total Effects
In the same way as for Insert and Master Effects, the
Total Effects can be controlled in realtime via Dynamic
Modulation (Dmod). You can use either the built-in
OASYS’s controllers or an external MIDI device,
during live performance or from a sequencer.
Program and Sampling modes
Effect parameters are controlled on the global MIDI
channel.
Combination and Sequencer modes
In Combination and Sequencer modes, the control
channel for TFX1 and TFX2 are specified by the
(Control Channel) setting in the TFX1 and 2 pages. You
can choose Ch01–16 or Gch.
Ch01–16: Choose from these settings if you want to
control each total effect on a separate channel.
Gch: Choose this setting if you want to control the total
effects on the global MIDI channel.
Note: In Sequencer mode, you can record and play back
exclusive messages, and edit tracks that include
System Exclusive events. This lets you switch effects or
vary the value of effect parameters while a song plays.