Kyocera Wild Card - Manual (Page 71)

User Guide 63
14 Voice recognition
With voice features, you can call a contact, dial a
phone number, access menus, or find contact
information from your voice dial list using
voice recognition.
Note: You cannot use voice recognition to end a
call; you must press the
End key when the flip
is open.
Voice dial list
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components for voice dialing recognition.
Add a voice tag
You can add a voice dial tag to your phone. See
“Add voice dial” on page 53.
Edit a voice tag
To edit existing voice dial tags;
1. Select
Menu > Contacts > Voice dial list .
2. Select your desired contact.
3. Highlight the number with a voice tag and
select Options > Add voice dial , Edit voice
dial or Erase voice dial .
4. Follow the prompts.
Voice commands
With voice commands, you speak your commands
into the phone’s microphone.
Start voice commands
1. Press the Call key to initiate voice commands.
The phone prompts, “Say a name or say dial”.
2. Say one of the following commands and
follow the voice prompts.
• “
Say a name ” to call a contact on your
voice dial list.
• “ Dial ” to speak the digits of the
phone number.
3. Press the Call key again to exit and go to the
Recent calls list.
Call a contact
Before calling a person, you need to add the
contact name to the Voice dial list.
See “Add voice dial” on page 53.
1. From the main screen, press the
Call key. The
phone prompts, “Say a name”.
2. Say the name of the person you want to call.
3. If the name you said matches a contact in the
Voice dial list, the phone responds: “Calling
(Name).” Remain silent to make the call, or
say “No” to cancel.
82-G1950-2EN.book Page 63 Tuesday, September 4, 2007 4:01 PM