Installation precautions, Environment – Kyocera FS-C8008DN User Manual

Page 13

Advertising
background image

xi

Installation Precautions

Environment

CAUTION

• Avoid placing the printer on or in locations which are unstable or not level. Such locations may

cause the printer to fall down or fall over. This type of situation presents a danger of personal
injury or damage to the printer. .......................................................................................

• Avoid locations with humidity or dust and dirt. If dust or dirt becomes attached to the power

plug, clean the plug to avoid the danger of fire or electrical shock. ......................................

• Avoid locations near radiators, heaters, or other heat sources, or locations near flammable

items, to avoid the danger of fire. ....................................................................................

• To keep the printer cool and facilitate changing of parts and maintenance, allow access space

as shown below. Leave adequate space, especially around the side cover, to allow air to be
properly ventilated out of the printer. ...............................................................................

• Always use the caster stoppers to stabilize the printer once it is in place to keep it from moving

and/or falling over and causing injury. .............................................................................

Other Precautions

• Adverse environmental conditions may affect the safe operation and performance of the

printer. Install in an air-conditioned room (recommended room temperature: around 20 °C,
humidity: around 65 % RH) and avoid the following locations when selecting a site for the
printer.

• Avoid locations near a window or with exposure to direct sunlight.

• Avoid locations with vibrations.

• Avoid locations with drastic temperature fluctuations.

• Avoid locations with direct exposure to hot or cold air.

• Avoid poorly ventilated locations.

• If the floor is delicate against casters, when this product is moved after installation, the floor

material may be damaged.

Left: 50 cm
(19-11/16 inches)

Advertising