2 kc-gl pen width and color, Kc-gl pen width and color -43 – Kyocera FS-C8008DN User Manual
Page 88
3.6 Making Default Settings
3-43
3.6.2
KC-GL Pen Width and Color
The KC-GL emulation mode enables you to set the pen widths in dots, individual pen colors
for pen numbers 1 to 8, and the KC-GL page size.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Emulation appears on the message display.
3
33
3
If the current emulation is other than KC-GL, press the ENTER key. A blinking
question mark (?) appears.
4
44
4
Press the U or V key repeatedly until KC-GL appears. Press the ENTER key.
5
55
5
Press the Z key to move to the >KC-GL Pen Adjust> submenu. To change the
pen width and/or pen color, press the ENTER key. A blinking question mark (?)
appears.
6
66
6
Press the U or V key repeatedly until the desired pen number of 1 to 8 appears.
When the desired pen number is displayed, press the ENTER key.
7
77
7
To change the pen width, press the Z key, then press the ENTER key. A blinking
cursor appears at the width value.
8
88
8
Press the U or V key repeatedly until the desired pen width in dots (00 to 99)
appears. When the desired pen width is displayed, press the ENTER key.
9
99
9
To set the pen color, press the U or V key. To change the pen color, press the
ENTER key. A blinking question mark (?) appears.
10
10
10
10
Press the U or V key repeatedly until the desired pen color (Black, Red, Green,
Yellow
, Blue, Magenta, Cyan, White) appears. When the desired pen color is
displayed, press the ENTER key.
11
11
11
11
To set the KC-GL page size, press the Y key twice, then Press the U or V key until
>KC-GL Page Set is displayed.
Emulation >
KC-GL
>KC-GL Pen
Adjust ? Pen (1)
>>Pen(1) Width
02 dot(s)
>>Pen(1) Color
? Black