Kenmore 625.3483500 - Manual (Page 30)

SERVICER’S TECH. INFORMATION
SECTION 5
30
5E. WATER FLOW THROUGH THE SOFTENER VALVE
FAST RINSE CYCLE
During FAST RINSE, the rotor & disc is positioned so water flow enters the resin tank
through the top distributor, and exits through the bottom distributor, to the drain.
The solid state timer again energizes the motor to return the valve to service, and as the
valve rotates, the position switch lever drops to open the circuit. The valve remains posiĆ
tioned in service until the timer initiates the next regeneration.