Water softener start-up, 1c. program the timer fig. 1, Fig. 2 – Kenmore 625.3483500 User Manual

Page 6

Advertising
background image

WATER SOFTENER START-UP

SECTION 1

6

1C.

PROGRAM THE TIMER

FIG. 1

ON / OFF VACATION

RECHARGE NOW

Solid State Water Softener

display

buttons

Standard Capacity

HOLD

PRESENT TIME AND DAY

RECHARGE TIME

RECHARGE DAY

SET / CLEAR

1
2

3

4

5

1.

SET THE TIMER

When the transformer is plugged into the elecĆ

trical outlet, 12:00 AM, SUnday began to flash

in the time display. Set the time of day and

present day of week as follows:

a.

SET TIME OF DAY

1. Press the PRESENT TIME AND DAY button 

once. The hour display continues to flash.

2. Press the SET/CLEAR button  until the presĆ

ent hour of the day shows in the display. Be

sure AM for morning hours, or PM for afterĆ

noon and evening hours shows.

NOTE:

Press SET/CLEAR and quickly release to move the

hour display ahead 1 at a time to the correct hour.

Or, hold the SET/CLEAR button to move the

display ahead 2 hours each second, to the correct

hour.
3. Press button  once to steady the hour disĆ

play, and minutes begin to flash. Repeat step

a2 to set the correct minutes.

4. Press button  again to steady the minute disĆ

play (day will begin flashing). Figure 2 shows

the timer set at 3:30 PM. See step b to set the

present day.

b.

SET PRESENT DAY OF WEEK

1. Press the SET/CLEAR button  to set the presĆ

ent day of the week in the display.

NOTE:

Press SET/CLEAR and quickly release to move the

day display 1 at a time. Or, hold the SET/CLEAR

button to move the day display ahead 2 days each

second.
2. Press the PRESENT TIME AND DAY button 

again to steady the entire display. Figure 2

shows the timer set at TUesday.

FIG. 2

.

.

TU

PM

EXAMPLE: This drawing
shows 3:30 PM as the
present time of day, and
TUesday is the current
day of the week.

ON / OFF

VACATION

HOLD

RECHARGE NOW

PRESENT TIME AND DAY

RECHARGE TIME

RECHARGE DAY

SET / CLEAR

1

2
3

4
5

No other settings are needed after installing

your water softener. The softener is factory set to

regenerate every Monday, Wednesday and SaturĆ

day (beginning at 2:00 AM). For most families, this

gives enough soft water for their needs. However,

if you want the softener to regenerate at a

different time, or on different days, or to set

for the most efficiency, see FineĆTuning

Your Water Softener," page 18.

SEE PAGE 9 FOR OTHER TIMER CONTROLS
AND FEATURES.

Advertising
This manual is related to the following products: