KVH Industries KVH TracVision - Manual (Page 11)

PLEASE NOTE!
If the TracVision system was left on when the vehicle was last turned
off, TracVision will automatically turn on when you start up the
vehicle. DO NOT DO ANYTHING! Wait 30-60 seconds for the
Program Guide to load and you are ready to watch TV – if the
Program Guide doesn’t load, check for blockage as noted in step 7.
1. Turn on the car.
2. Ensure that the receiver’s power switch
is turned on. The light should be lit.
(The receiver beeps twice.)
3. Turn on the video screen and select the A5 receiver input (not the
DVD/VCR input).
4. Do not move the vehicle for 20 seconds.
5. If the TracVision system was left on when the vehicle was last
turned off, Message 1 then Message 2 will appear on the screen.
54-0239 TracVision A5 Shop Manual © 2004 KVH Industries, Inc., All rights reserved.
Proper Operation
Effective April 2004
Subject to change without notice
Activation & Operation
Installation
If your satellite dish is ready for DIRECTV ®
service, please wait until your
Advanced Program Guide
™ is prepared.
Searching for satellite signal...
Installation
If your satellite dish is ready for DIRECTV ®
service, please wait until your
Advanced Program Guide
™ is prepared.
Acquiring guide data...
Message 1 Message 2
then
CONTINUED ON NEXT PAGE...