Do’s and don’ts - wiring (cont’d), Do not – KVH Industries KVH TracVision User Manual

Page 19

Advertising
background image

54-0239

TracVision A5 Shop Manual

© 2004 KVH Industries, Inc., All rights reserved.

DO NOT...

• DO NOT route the antenna cable where it may become chafed.

• DO NOT disconnect the two short cables that connect from one

jack to another on the receiver’s rear panel. The system will not
work if these cables are disconnected.

• DO NOT connect any other type of receiver to the TracVision

system.

Do’s and Don’ts - Wiring (cont’d)

Effective April 2004
Subject to change without notice

Do’

s & Don’ts

Advertising