Kensington iP-30 - Manual (Page 10)

E-10
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Input Connectors)
1. Test (maintenance) connector
This special connector is used at the time of maintenance
and factory tests. It cannot be used for other connections.
2. Computer/video (D terminal output) video input connector
Use this input terminal for connection to a computer’s ana-
log RGB input connector or a video deck’s D connector
output using an RGB conversion cable (sold separately).
See pages E-16 and 20.
3. S-video input connector
This input connector is for use with the (Y/C) video.
See Page E-20.
4. Video input connector
This input connector is for use with the video (NTSC / PAL
/ SECAM). See Page E-20.
5. Audio input connectors for the video
Audio input connectors for use with the video. (Stereo sup-
ported)
See Page E-20.
NOTE: The sound of the left and right channels is output
from the monaural speaker.
6. Computer audio input connector
This audio input connector is used for connection to a com-
puter (stereo compatible).
See Page E-16.
7. USB connector*
This connector is used for USB connections with a per-
sonal computer.
* iP-30SE only.
TEST RGB S V L R AUDIO USB
1 2 3 4 5 6 7