Adjusting the brightness – Kensington iP-30 User Manual
Page 25
E-
Regular Operation
Adjusting the Brightness
NOTE:
• If no operation is performed for several seconds while the brightness adjustment bar is displayed, the brightness adjustment
bar turns off.
Brightness adjustment bar
Operation with the Projector
The brightness cannot be adjusted from the main unit’s
control panel.
Operation with the Remote Control
Adjust using the BRIGHTNESS (+)/(-) buttons.
(+) : Projection image becomes brighter
(–) : Projection image becomes darker
To change the brightness, perform a manual adjustment using the method described below.
Moving the Screen
Operation with the Projector
Scrolling is not possible from the main unit’s control
panel.
Operation with the Remote Control
Press the SCROLL (
▲▼◀▶) buttons.
Movement is possible in 4 directions (up, down, left, and right).