Kenwood NEXEDGE NX-700H - Manual (Page 18)

2
Many functions on this transceiver are selected or configured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.
m
enu
A
cceSS
1 Press the key programmed as Menu.
2 Press the / keys to select your desired Menu item.
• If you are using a microphone keypad, you can directly enter a Menu number to skip
to that Menu.
3 Press the key to set up the selected Menu item.
4 Press the / keys to select your desired setting.
• For settings with more than  level, repeat steps 3 and 4.
5 Press the key to set the selected setting and exit Menu mode.
• Press the key at any time to return to the previous display.
• Press the key at any time to exit Menu mode.
m
enu
c
onFigurATion
Some transceiver keys may already be programmed with functions listed in
the Menu. Those functions can be accessed directly by pressing the key, or
by accessing the Menu. All other functions can still be accessed using the
transceiver Menu. The following table lists all the available Menu items.
No. Menu Description
0 2-TONE 2-tone Mode
02 AUTO REPLY MSG Auto Reply Message ON/OFF
03 AUTO TELEPHONE Auto Telephone
04 AUTO DIAL Autodial Mode
05 AUTO DIAL PROG Autodial Programming Mode
06 AUX A AUX A ON/OFF
07 AUX B AUX B ON/OFF
08 BROADCAST Broadcast ON/OFF
09 CLOCK Clock ON/OFF
0 CLOCK ADJUST Clock Adjustment mode
 DIRECT CH SEL Direct CH/GID  ~ 5 Select
2 DISP FORMAT Display Format ON/OFF
3 FIXED VOLUME Fixed Volume
MENU MODE