Kenwood NEXEDGE NX-700H - Manual (Page 27)

2
m
Aking A
T
elephone
c
All
■ Manual Dialing
1 Select your desired zone and telephone group ID.
2 Press the microphone PTT switch to start the call.
3 Enter your desired number using the microphone keys.
■
Selecting a Number from the List
1 Select your desired zone and telephone group ID.
2 Press the key programmed as Autodial.
• The last called unit appears on the display.
3 Press the / keys to select your desired list number.
4 Press the microphone PTT switch to start the call.
r
eceiving A
T
elephone
c
All
When a call is received, press and hold the microphone PTT switch to speak, and
release it to receive.
• Only one person can speak at a time.
TRUNKING CALLS (ANALOG)