KORG MR-2000S - Manual (Page 16)

16
7. Other playback/editing operations
Selecting the project/file to play
Use the dial to select (or choose from a list) the project/file that you want to play.
When you turn on the power, the most recently selected project/file will be selected.
The order of the project/files
The order of the projects/files in the folder on the library select screen (LIBRARY) is listed according
to the order in which they were created (FAT order), but the folders can be sorted in alphabetical
order and displayed that way also.
Each time you hold down the menu button for 2 seconds, the library will toggle between alphabeti-
cal order and the order of creation.
Selecting a project/file using the dial
When the display shows the home screen while the MR-2000S is either playing or stopped, you can turn
the dial to select a project/file within the selected folder or play list.
When you turn the dial, the project/file name at that location will be displayed; then after approximately
two seconds, the MR-2000S will load the displayed project/file that was selected. If you were playing a
project/file, the loaded file will play automatically. If the unit was stopped, then the file will load ready to
play.
Selecting a project/file from a list
1. Press the menu button, and in the menu list (MENU) screen, use the dial to select "LIBRARY" and
then press the enter button to confirm.
The library select (LIBRARY) screen will appear.
MR Project: This library contains projects recorded on the MR-2000S.
Audio: This folder contains audio files recorded on a device other than the MR-2000S.
Play List: This is the play list ( →p.25).
2. In the library select (LIBRARY) screen, use the dial to select "MR Project," and press the enter button
to confirm.
The date folder select screen will appear, listing the date folders.
Step 3 is not necessary if you selected and confirmed "Audio" from the library select (LIBRARY)
screen.
3. In the date folder select screen, use the dial to select the folder that contains the project you want to
select, and press the enter button to confirm.
The project select screen will appear.
In order of creation In alphabetical order
Hold
down