KORG MR-2000S - Manual (Page 23)

23
2. Use the dial to select the item that you want to edit, and press the enter button to confirm.
Changing the time locations of the marks
You can register marks in any position of the WAV, DFF or WSD project, but for the DSF project, only
the 11.6 ms (Fs=2.8 MHz) or larger size mark can be registered by a unit of 5.8 ms (Fs=5.6 MHz).
When the time locations are changed, each location is automatically set to the nearest position within
its specified region.
1. When you use the dial to select the time, the time location of the mark will be changed, and press
the enter button to confirm.
The selection icon will change from " " to " ".
2. The highlighted place will change each time you press the enter button.
By pressing the enter button when the last place is highlighted, you can exit from changing the time
location; to continue changing the time location, simply press the enter button again.
3. To change the digits of the highlighted place, turn the dial to specify the value and press the enter
button to confirm it.
Repeat these steps to specify the time location for the mark.
4. When you've finished adjusting these settings, press the exit button to return to the mark edit
select screen.
Deleting a mark (Delete Mark)
1. When you use the dial to select "Delete Mark" and press the enter button to confirm, a dialog
screen will ask you to confirm the deletion.
2. Use the dial to select [Yes] and press the enter button to confirm.
If you decide not to delete the mark, use the dial to select [No] and press the enter button to confirm
(or press the exit button), and you'll return to the mark edit select (Mark Edit) screen.
3. The screen will indicate "Working..." and the mark will be deleted. When deletion is finished, the
screen will indicate "Completed."
4. Press the exit button (or the enter button) to return to the mark list (Mark List) screen.