Kohler Thermostatic Electric Shower - Manual (Page 24)

4
Make sure that the electrical supply
is turned off at the mains and that
the water supply is fully turned off.
Hold a wrench across the flats of
the metal connector. Unscrew
the filter using another wrench as
shown. Clean or renew the Filter
as necessary. Refit in reverse order
making sure the Filter is screwed
fully home.
Do not overtighten. Make sure
plumbing connections are sealed
before restoring electricity supply.
Inlet Filter - Cleaning/Renewing
Read the section “Important Safety Information” first
Remove the three screws and
the cover.
Caution! Handle glass cover
assembly with care.
Refit the Cover making sure
it is correctly located. Do not
overtighten the screws.
Cover
Cover Retaining Screw
Filter