Important safety information, Warning – Kohler Thermostatic Electric Shower User Manual

Page 4

Advertising
background image

4

Important Safety Information

Warning!

Follow all warnings, cautions and instructions contained in this guide, and

on or inside the appliance.

. Products manufactured by us are safe and risk-free, provided that they are

installed, used and maintained in good working order, in accordance with our

instructions and recommendations.

. Isolate the electrical and water supplies before commencing installation. The

electricity must be turned off at the mains and the appropriate circuit fuse

removed, if applicable.

3. Mains connections are exposed when the cover is removed.

4. Refer to the wiring diagram before making any electrical connections (see

internal wiring diagram at the back of the book).

5. Make sure that any pipework that could become frozen is properly insulated.

6. Having completed the installation, make sure that the user is familiar with the

operation of the appliance.

7. Make sure that this guide is left with the user.

8. DO NOT commission this appliance if water leaks from the unit or the heater

tank pressure relief valve.

9. DO NOT fit any form of outlet control (e.g. Trigger handset) as the outlet acts

as a vent for the tank body. Only Mira recommended outlet fittings should be

used.

0. Ensure all electrical connections are tight, to prevent overheating.

. Warning! DO NOT operate this appliance if it is frozen. Allow the appliance to

thaw before using. The shower unit must not be fitted where it may be exposed

to freezing conditions.

. This product is not suitable for areas with high humidity (i.e. steam rooms).

Please consult your installer.

3. THIS APPLIANCE MUST BE EARTHED. ENSURE SUPPLEMENTARY

BONDING COMPLIES WITH THE “REQUIREMENTS FOR ELECTRICAL

INSTALLATIONS”.

In accordance with the current edition of “The Plugs and Sockets etc. (Safety)

Regulations” in force at the time of installation, this Mira Escape is intended to

be permanently connected to the fixed electrical wiring of the mains system.

Installation must be carried out in accordance with these instructions, and

must be conducted by designated, qualified and competent personnel.

Advertising