Kenwood R-K711 - Manual (Page 33)

CD
Related
Information
English
CD
33
Related
Information
English
CD Repeat Playback Mode R P.35 z
Press the [CD E] key to begin playback. 5 5
To select two or more tracks, repeat steps 2 and 3
( CD ), or steps 1- 2 to 3 ( MP3/WMA/AAC ).
You can select up to 32 tracks. If you attempt to select more tracks, the
“CD PGM FULL” message is displayed. z
4 4
If you enter the wrong information, press the [CLEAR] key before you
proceed to step 3. Then enter the information again.
Proceed to step 3 within 20 seconds after selecting a track or fi le.
z
z
Press a number key or the [ G]/[H] key to select
the track or fi le you want to listen to.
2 2
Press the [ENTER] key. 3 3
If you turn the system off or remove the CD for which program playback
is set, the information in the specifi ed program is erased. z
To cancel program mode
Stop playback and press the [P.MODE] key so that “PGM” is no
longer displayed. This erases the selected program.
To clear a programmed track
Stop playback and then press the [CLEAR] key.
Each time you press the key, the last programmed track is erased.
To add more tracks later
If you are already playing a CD, stop playback and carry out steps 2
and 3 (
CD ) or steps 1- 2 to 3 ( MP3/WMA/AAC ).
„
„
„
When track number 10 is selected
as program track 1 When fi le number 5 is selected
CD MP3/WMA/AAC