Setting the time – Kenwood R-K711 User Manual
Page 69
Related
Information
69
English
Set the system clock to the correct time. If you use the Program Timer for playback when the time
is not set correctly, you will not be able to run the program at the correct time.
Set the time.
4
4
Select “TIME ADJUST”.
Press the [
G] or [H] key.
2
2
Set the day of the week.
Press the [
G] or [H] key.
3
3
Press the [
G] or [H] key.
Set the “hour”.
Press the [
G] or [H] key.
Set the “minute”.
Press the [ENTER] key.
Press the [ENTER] key.
The set day and time are displayed.
z
If you make a mistake, redo the procedure from the beginning.
If there is a power failure or the system is unplugged from the wall outlet
for some time, set the time again.
Pressing the [
F] key while the system is in the Standby mode will display
the time for 5 seconds.
z
z
z
Press the [ENTER] key.
Press the [ENTER] key.
Press the [MODE] key.
1
1
Setting the Time