Kenwood R-K711 - Manual (Page 37)

37
Related
Information
English
Presetting Stations Automatically (AUTO MEMORY) R P.38
Presetting Stations Manually (Manual Preset) R P.39
Audio Settings R P.47 onwards
z
z
z
Auto tuning
(Select this mode when
reception is good.)
Manual tuning
(Select this mode when
reception is poor.)
AUTO lit AUTO unlit
1 Select Auto tuning or Manual tuning.
2 Select a station.
When the station is tuned, “TUNED“ lights up on the display. If you are
receiving a stereo signal, “ST.” also lights up.
Using Auto tuning
The radio automatically tunes in to the next station each time you press
the key. Repeat this step until you are tuned in to your preferred station.
Using Manual tuning
Press the key until the desired station is tuned or until you reach the
desired frequency.
„
„
Press the [TUNING MODE] key.
The mode changes as shown below each time you press the key.
Choosing from stations that are not stored (Auto/Manual tuning)
Press the [ G/I] or [J/H] key.
There is no sound while Auto/Manual tuning is in progress.
Auto tuning provides stereo reception while manual tuning provides
monaural reception.
The display changes as shown below each time you press the
[DISPLAY] key.
FM:
Program service name
R Preset No. R Day/Clock
When the program service name is not stored:
Preset
No. R “NO PS” R Day/Clock
AM:
Preset
No. R Day/Clock
z
z
z
Press the [AUTO/MONO] key.
Press the [TUNING I/J] key.
Receiving Broadcast Stations