One-touch recording of one cd, md, One-touch edit recording of all tracks), Make the preparations for recording – Kenwood XD-980MD User Manual
Page 44: Md = tape, Cd = md, Start recording. md = tape cd = md, Md = tape cd = md, Cd = tape
XD-980MD (En)
4 4
Preparation section
Basic section
Application section
Knowledge sections
Convenient Recording Methods
1
Make the preparations for recording.
2
One-touch recording of one CD, MD
(one-touch edit recording of all tracks)
All tracks of one CD or MD are recorded.
Recording is possible to tape or MD from CD and to tape from MD.
For recording to tape, please read “Let's record” in the operation manual of the cassette deck (option) carefully.
When equalizer, SRS 3D, or any other effect is applied
to the sound, the sound with applied effect can be re-
corded (except for digital recording from CD to MD).
´ˇ
MD
=TAPE
1Load a tape.
2Select the tape transport direction.
(
2 or 3)
3Select “p”. (two-side recording)
4Select the Dolby NR mode.
5Select MD with the INPUT key.
6Insert disc(s) in the MD recorder.
)
7Adjust the recording level.
CD
=MD
1Insert a recordable disc into the MD
recorder.
2Select CD with the INPUT key.
3Insert disc(s) in the CD player.
*
Start recording.
MD
=TAPE
CD
=MD
1Select the target disc.
CD player and MD recorder must be brought to stopped condition.
2Start recording.
Press before playback
of the CD starts.
When the O.T.E. key is pressed after playback has
started, only the track being played at that time will be
recorded.
t
Note
Note
÷
With recording onto tape, the track will be interrupted for the
part of the guide tape at the tape reversal, where recording is
not possible. Please use a different recording method if this is
to be avoided.
MD
=TAPE
CD
=MD
÷
Recording and playback will be stopped.
To interrupt a recording
Press in stop mode.
CD
=TAPE
1Load a tape.
2Select the tape transport direction.
(
2 or 3)
3Select “p”. (two-side recording)
4Select the Dolby NR mode.
5Select CD with the INPUT key.
6Insert disc(s) in the CD player.
*
7Adjust the recording level.
MD
TAPE
CD
TAPE
DISC SELECTOR
DISC
1
DISC
2
DISC
3
7
7
7
CD
=TAPE
1Select the target disc.
2Start recording.
Press before playback
of the CD starts.
DISC SELECTOR
DISC
1
DISC
2
DISC
3
O.T.E.
CD
=TAPE