Kompernass PKGS1450 - Manual (Page 11)

13 GB/IE
L Cleaning
L Maintenance and cleaning
Warning! Always make sure that the mains plug is
out of the socket before doing any work on the device.
j When replacement becomes necessary the sup-
plied spare carbon brushes (c) must be installed
only by an authorised electrician.
j Clean the sliding roller and the automatic blade
guard R so that they move freely.
j Do not allow any liquids to enter the machine.
Use a cloth or a thin brush to clean the housing.
Remove dust / splinters by blowing with com-
pressed air.
L Disposal
The packaging is made from environmentally-
friendly material and can be disposed off at
your local recycling plant.
Do not dispose of electrical tools with
the household rubbish!
In accordance with European Directive 2002 / 96 / EC
about waste electrical and electronic equipment and
its transposition into national legislation, worn out
electrical tools must be collected separately and
taken for environmentally compatible recycling.
Please contact your local council office to find out about
disposal facilities for your worn-out electrical tools.
L Information
L
Service
The service centre for your country is shown in the
guarantee documentation.
L Manufacturers’ declaration of
conformity
We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum,
Germany, declare that this product complies with the
following EU directives:
Machinery Directive: (98 / 37 / EC)
EC Low Voltage Directive (2006 / 95 / EEG)
Electromagnetic compatibility: (89 / 336 / EEC)
Applicable harmonised standards:
EN55014-1
EN55014-2
EN61000-3-2
EN61000-3-3
EN61000-6-1
EN61000-6-3
EN61029-1
EN61029-2-9
EN60825-1
Description of the product:
Chop and mitre saw PKGS 1450 LASER
Bochum, 31.07.2007
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
Cleaning / Disposal / Information