KVH Industries TracVision 4 User Manual
Page 67
4. With the antenna reflector slightly elevated, slip
the narrow end of the elevation shipping restraint
beneath the lip of the reflector. Gently wedge the
restraint inside the baseplate as shown in
Figure 4-14.
5. Pack the TracVision 4 antenna unit in its original
package.
6. As detailed in the warranty accompanying this
product and printed on the last page of this
manual, a Return Material Authorization (RMA)
number is required prior to the return of the
TracVision 4 system to KVH. Contact the KVH
Technical Support Department at +1 401 847-3327
or via e-mail at [email protected] to obtain the RMA
number. Please review your warranty to
familiarize yourself with all requirements,
liabilities, and policies.
Maintenance
54-0150
67
Figure 4-14
Elevation Shipping Restraint
Placement
Foam Restraint
KVH is not liable for damage
caused by improper shipping.
Before returning the product, be
sure to obtain an RMA number
from KVH’s Technical Support
Department and write the
number on the outside of the
box. Shipments received without
an RMA number will be returned
to you at your expense.