Kawasaki 1600 - Manual (Page 14)

12 ASSEMBLY
Front Fender Installation
•
Lift the motorcycle off the crate base and sup-
port the motorcycle with a suitable stand or
jack.
•
Loosen the axle clamp bolts on the right fork
leg and remove the front axle.
•
Loosen the two flanged bolts (D = 10, L = 47)
to remove each front brake caliper.
A. Front Brake Calipers
B. Flanged Bolts (D = 10, L = 47)
CAUTION
Do not leave the calipers hanging by
the brake hoses.
After removing the
calipers, secure them to the frame using
a suitable band.
•
Install the front fender with its more rounded
end facing forward.
A. Front Fender
B. Forward
•
Install the front fender on the fork legs, and in-
stall the front left and right brake hose clamps
on the inside of the fender with the four bolts
(D = 8, L = 35) and tighten them.
US and CN Models
A. Front Fender
B. Bolts (D = 8, L = 35)
C. Brake Hose Clamp (Left)
Other than US and CN Models
A. Front Fender
B. Bolts (D = 8, L = 35)
C. Brake Hose Clamp (Left)
Front Wheel Installation
•
Check the wheel rotation mark on the front
tire.
NOTE
ż The direction of the wheel rotation is shown
by an arrow on the front tire. Install the wheel
so that the rotation mark coincides with wheel
rotational direction.