Konica Minolta II - Manual (Page 13)

11
IF THE SCANNER IS INSIDE THE CHAIN…
1. Connect one end of the SCSI cable A into
either SCSI port on the back of the scanner.
• Either SCSI port can be used, there is no dedicated in or
out port.
Cable “A” Cable “B”
Scanner
SCSI Device 1 SCSI Device 2
Computer
The following is an example of one possible SCSI chain configuration.
2. Plug the other end of SCSI cable A into SCSI
device 1.
One D-sub-25 to Centronics 50 cable is included with your scanner. Please see your dealer if you require additional
cables.
Continued on following page.
TURN OFF THE COMPUTER AND ALL THE SCSI DEVICES
BEFORE CHANGING SCSI IDS, CONNECTING SCSI
CABLES, OR DISCONNECTING SCSI CABLES.