Konica Minolta II - Manual (Page 23)

21
3. Place the film in the mask
using the film guides.
• Place the film emulsion side down
(p 14).
4. Align the desired frame within
the scanning window.
5. Press the cover firmly closed
until it clicks.
Make sure the film lies flat between the
film guides.
Make sure the film lies flat between the
film guides.
Always use a proper
ly
fitting mask with the
medium f
ormat film
holder. If no mask or a
mask that is too large
is used, refr
acting light
will degr
ade image
quality.