System requirements, Macintosh – Konica Minolta II User Manual
Page 7
SYSTEM REQUIREMENTS
5
MACINTOSH
CPU: Power PC, Power Macintosh G3, Blue & White Power Macintosh G3 and Power Macintosh G4 (Except for 68 K
Macintosh and Mac OS compatible unit). Power Macintosh G4 is recommended when loading with 16 bit and using the
Digital ROC/GEM functions.
Operation System:
Mac OS 7.5.3 to 9.0.4
Memory:
A minimum of 32 MB (megabytes) application RAM in addition to the requirements for the
Mac OS.
256 MB or more when loading with 16 bit and using the Digital ROC/GEM functions.
Hard Disk Space:
About 600 MB or more of available hard disk space.
About 2 GB or more of available hard disk space when loading with 16 bit and using the
Digital ROC/GEM functions. (About 3 GB or more is recommended.)
Monitor:
Minimum 13 (640 x 480) inch monitor capable of displaying at least 32,000 Colors.
19 inch(1024 x 768) or larger is recommended.
CD-ROM Drive:
Necessary (when installing the software.)
Recommended SCSI Board:
With a Power Macintosh and Power Macintosh G3
The standard built-in SCSI board
Connecting to the extension board inserted into the PCI bus/NuBus is not available.)
With a Blue & White Power Macintosh G3*, Power Macintosh G4
Adaptec PowerDomain 2940UW/U2W, PowerDomain 2930U, SCSI Card 2906, and AVA-
2903B
* Some models in the Blue & White Power Macintosh G3 series use the Ultra2 Wide SCSI
board as the standard built-in SCSI board, however, connecting the Dimage Scan Multi II to
the standard built-in SCSI board is not recommended. The connecting capacity may be
limited and the full capabilities of the PC may not be usable due to the specifications of the
standard built-in SCSI board.
When using the model which has the standard built-in SCSI board, insert the
recommended SCSI board as described above in the open slot without detaching the
standard built-in SCSI board and then connect the Dimage Scan Multi II to the SCSI
connctor on the inserted SCSI board.
Other:
Adobe PhotoShop Ver. 4.0.1, Ver. 5.0.2, Ver. 5.5 and Adobe Photoshop 5.0 LE have been
fully tested for use with the plug-in software.
MACINTOSH
CPU:
IBM PC/AT compatible with an Intel Pentium processor 90 MHz or above.
• Support cannot be provided for custom or home built machines.
Pentium III Processor is recommended when loading with 16 bit or using the Digital
ROC/GEM functions.
Orerating System:
Windows®95 (inc. OSR2), Windows®98 (inc. Second Edition), Windows®2000
Professional, Windows®NT 4.0
Memory:
A minimum of 32 MB (megabytes) of RAM.
A minimum of 512 MB when loading with 16 bit and using the Digital ROC/GEM functions.
Hard Disk Space:
About 600 MB or more of available hard disk space.
About 2 GB or more of available hard disk space when loading with 16 bit and using the
Digital ROC/GEM functions. (About 3 GB or more is recommended.)
Monitor:
Minimum VGA (640 x 480) monitor capable of displaying High Color (16 bit) is required.
XGA (1024 x 768) or larger is recommended.
CD-ROM Drive:
Necessary (when installing the software.)
Recommended SCSI Board:
Adaptec AHA-1510B, AHA-1520B, AHA-1540CP, AHA-2910B, AHA-2910C, AHA-2920C,
AHA-2940, AHA-2940U/W/AU/UW/U2W, SCSI Card 19160/29160/29160N, AVA-
2902E/2903B/2906
Other:
Photoshop Ver. 3.0.5, Ver.4.0.1, Ver. 5.0.2, Ver. 5.5, Photoshop 5.0 LE, Paint Shop Pro Ver.
6, Corel PHOTO-PAINT Ver. 9* have been fully tested for use with the TWAIN driver
software.
*Corel Scan is not recommended.